Lame industriali per incastri 240
Impiego: per incastri e scanalature. Utilizzate accoppiate possono effettuare battute, smussature, scanalature e rifilature.
Macchine: combinate e scorniciatrici.
Materiale: legni teneri e duri, multistrato, truciolare, laminati e MDF.
CARATTERISTICHE TECNICHE DEI DENTI HW:
-altezza dente in mm: 10 -qualità, codice ISO: K01 -durezza (HV10): 1.840 -resistenza flessionale (N/mm2): 2.050
| D | K | P | F | Z | a | b | Materiale | Codice | Disp. | Prezzo (iva inc.) | Quantità |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 150 | 2,0 | 1,4 | 30 | 12 | 15° | PIANA | HW | 240.020.06M |
|
€ 17,76 | |
| 150 | 2,0 | 1,4 | 35 | 12 | 15° | FLAT | HW | 240.020.06R |
|
€ 17,76 | |
| 150 | 3,0 | 2,0 | 30 | 12 | 15° | FLAT | HW | 240.030.06M |
|
€ 22,44 | |
| 150 | 3,0 | 2,0 | 35 | 12 | 15° | FLAT | HW | 240.030.06R |
|
€ 22,44 | |
| 180 | 3,0 | 2,0 | 30 | 18 | 15° | FLAT | HW | 240.030.07M |
|
€ 29,45 | |
| 180 | 3,0 | 2,0 | 35 | 18 | 15° | FLAT | HW | 240.030.07R |
|
€ 29,45 | |
| 150 | 4, | 3,0 | 30 | 12 | 15° | FLAT | HW | 240.040.06M |
|
€ 27,29 | |
| 150 | 4,0 | 3,0 | 35 | 12 | 15° | FLAT | HW | 240.040.06R |
|
€ 27,29 | |
| 180 | 4,0 | 3,0 | 30 | 18 | 15° | FLAT | HW | 240.040.07M |
|
€ 36,82 | |
| 180 | 4,0 | 3,0 | 35 | 18 | 15° | FLAT | HW | 240.040.07R |
|
€ 36,82 | |
| 150 | 5,0 | 3,0 | 30 | 12 | 15° | FLAT | HW | 240.050.06M |
|
€ 29,89 | |
| 150 | 5,0 | 3,0 | 35 | 12 | 15° | FLAT | HW | 240.050.06R |
|
€ 29,89 | |
| 180 | 5,0 | 3,0 | 30 | 18 | 15° | FLAT | HW | 240.050.07M |
|
€ 41,58 | |
| 180 | 5,0 | 3,0 | 35 | 18 | 15° | FLAT | HW | 240.050.07R |
|
€ 41,58 | |
| 150 | 6,0 | 3,0 | 30 | 12 | 15º | FLAT | HW | 240.060.06M |
|
€ 33,78 | |
| 150 | 6,0 | 3,0 | 35 | 12 | 15° | FLAT | HW | 240.060.06R |
|
€ 33,78 | |
| 180 | 6,0 | 3,0 | 30 | 18 | 15° | FLAT | HW | 240.060.07M |
|
€ 47,21 | |
| 180 | 6,0 | 3,0 | 35 | 18 | 15° | FLAT | HW | 240.060.07R |
|
€ 47,21 |
!
